Netherlands - Circuit Zandvoort Track details - F1 2020

Zandvoort  Geographical Location . Resource : Google Earth




Zandvoort circuit  Bird eye view . Resource : Google earth
Yes, this the week we would have witnessed the brand new Zandvoort circuit for the first time after a long time. It was the most awaited track to experience for the year. the heavily banked corner had so many anticipations in challenging the drivers.

It was closed earlier due to noise pollution to the surrounding and though tracks were made shorter to reduce pollution, the company maintaining the track broke and made it never available to the Formula one.
__
Track details are approximate as drivers are yet to explore with 2020 cars. Sectors are approximately divided based on the time taken to cover the entire track.
__
Track has sanddune characteristic of going up and down through out the lap.
Track has three straights with pit stop straight being the longest one of 678 meters. Every corner starting from Tarzan corner, sweeping Esses , ending parabolica seems to pose a challenge to the drivers.

Zndvoort circuit Layout prediction- Created with illustrator 

Sector 1( Turn 1 to turn 7)
Lap starts from near end of the longest straight of the track . Turn 1 , Tarzan U corner could be the challenging corner of all and critical point for overtakes after long straight. After a kink of turn 2 , comes a banked tight U mid speed corner. There is a huge elevation change drivers must position to sway through the following eases turn 4 to turn 6 . Sector ends with Hig speed right hander turn 7.
__
Sector 2 ( Turn 8 to turn 10 )
Sector 2 starts with hard right hander and leads to continous right and left mid speed corners turn 9 and turn 9 . sweeping a left hander turn 10 leads to the first DRS zone of the lap.
__
Sector 3 ( Turn 11 to turn 14)
a low speed turn 11 and U turn 12 , probably acts as a chicane ,it sets a critical point for the overtakes at the end of the straight. after a short straight through turn 13 , it leads to the iconic parabolic of the circuit. New corner is banked at 18 degrees to make 2020 cars able to corner. Banked corners help in utilising centripetal force to add up to the downforce. Wider track also opens opportunity to overtakes and challenging start finish straight ahead.
__



Turn 14 aerial View . Resource : Forumula one youtuube video
In overall , track is filled with challenging mid speed and high speed corner, combined with sanddune structure, it is gonna be a roller coster effect to drivers.

Follow instagram.com/f1_tamizhan/

#netherlands#zandvoort #mercedes #amg #renault #mclaren #haasf1team🇺🇸 #alfaromeo #torrorosso #williamsracing #motorsports #cars #supercars #valtteribottas #lewishamilton #pierregasly #danykvyat #germanGP
#chennai #f1meme #f12019 #f12020 #f1racing
Location: Chennai, Tamil Nadu, India

Comments

Post a Comment

Popular posts from this blog

F1 Monza GP Track guide - Autodromo Nazionale Monza , Italy

Image
  Autodromo Nazionale Monza , Italy Italy Monza GP - F1 Tamizhan Circuit length : 5.793 km Laps : 53 Total race length : 306.72 Direction : clockwise Monza, the temple of speed. Circuit with the highest average speed and average lap time only around 90seconds in the F1 calendar. It's Ferrari's hometown, and they always try to put some show around. The track is a combination of long straights and chicanes that just don't suit Ferrari's cars right now. Cars are exclusively built for tracks such as Spa and Monza for extremely low drag setups due to a lot of straights. almost 80% of the lap goes on full throttle. Sector 1 The lap starts with the longest straight of around 1.1 km and cars reach a maximum of 340kmph before the first corner. Even before the lap takes it toll on the driver , they experience around 5.8g of deceleration to slow the car to around 70kmph for taking the first corner. It is the important overtaking spot of the track. The first chicane, the first cor...
Read more

How does Formula One (F1) Rear Wing operate ?

Image
Formula 1  Rear wing - F1 Tamizhan Before the diffuser came into action, it was wing structures that were included in front and rear, which are called as front and rear bodyworks. As we have seen in previous posts, more than 50% of the downforce is contributed by the rear body works, wing and diffuser. What is rear wing? The rear wing consists of two elements 1. Main plane 2. Adjustable flap Both the elements are in the shape of inverted airfoil held together in position with help of endplates. The main plate does not move and remains fixed. The purpose of endplates are to compensate the resulting vortices formed from wing edges which we will see in the upcoming post. Here we explore the structure of rear wing and how does it work. a. How does the main plane function? It directs the clean air flowing over the side bodywork upwards thereby exerting downforce that makes the car to stick more to the ground. The whole design has to in such a way, the stall should not happen because of ...
Read more

How does drag Reduction system (DRS) function in a Formula 1 car ?

Image
  What does adjusting flaps do? Adjusting the flap breaks the operation of the main plate of the rear wing and flaps together as a single unit. This improves the speed of the car by 10-15kmph by reducing the downforce (depends on design) and drag ( 5%). How does it reduce downforce and drag? As we see in the image, when the flap is deployed, airflow over the wing is broken and separated. This creates a condition of the wake that reduces the effectiveness of the wing, much of the air escapes the gap between the main plate and flap, thereby reducing downforce and consequent drag of the car. As downforce and drag is reduced, the car lightens thereby increasing top speed by 10-15 kmph.
Read more